Crate rp2040_hal

HAL for the RP2040 microcontroller

This is an implementation of the embedded-hal traits for the RP2040 microcontroller

NOTE This HAL is still under active development. This API will remain volatile until 1.0.0

Crate features

• chrono - Modifies some RTC access functions to use chrono types instead of a rp2040-hal specific DateTime type
• critical-section-impl - critical section that is safe for multicore use
• defmt - Implement defmt::Format for several types.
• disable-intrinsics - Disable automatic mapping of language features (like floating point math) to ROM functions
• eh1_0_alpha - Support alpha release of embedded-hal
• rom-func-cache - Memoize(cache) ROM function pointers on first use to improve performance
• rt - Minimal startup / runtime for Cortex-M microcontrollers
• rom-v2-intrinsics - This enables ROM functions for f64 math that were not present in the earliest RP2040s
• rp2040-e5 - This enables a fix for USB errata 5: USB device fails to exit RESET state on busy USB bus. Only required for RP2040 B0 and RP2040 B1, but it also works for RP2040 B2 and above. Note that the workaround takes control of pin 15 (bank0) during usb reset so the bank needs to be taken out of reset before calling UsbBus::new. Using let pins = Pins::new(peripherals.IO_BANK0, peripherals.PADS_BANK0, sio.gpio_bank0, &mut peripherals.RESETS); is enough to take the Bank 0 out of reset.
• rtic-monotonic - Implement rtic_monotonic::Monotonic based on the RP2040 timer peripheral

Re-exports

• pub extern crate fugit;
• pub use adc::Adc;
• pub use clocks::Clock;
• pub use i2c::I2C;
• pub use sio::Sio;
• pub use spi::Spi;
• pub use timer::Timer;
• pub use watchdog::Watchdog;
• pub use rp2040_pac as pac;

Modules

• adc
  Analog-Digital Converter (ADC)
• clocks
  Clocks (CLOCKS)
• dma
  Direct memory access (DMA).
• gpio
  General Purpose Input and Output (GPIO)
• i2c
  Inter-Integrated Circuit (I2C) bus
• multicore
  Multicore support
• pio
  Programmable IO (PIO) See Chapter 3 of the datasheet for more details.
• pll
  Phase-Locked Loops (PLL)
• prelude
  Prelude
• pwm
  Pulse Width Modulation (PWM)
• resets
  Subsystem Resets
• rom_data
  Functions and data from the RPI Bootrom.
• rosc
  Ring Oscillator (ROSC)
• rtc
  Real time clock functionality
• sio
  Single Cycle Input and Output (SIO)
• spi
  Serial Peripheral Interface (SPI)
• ssi
  Synchronous Serial Interface (SSI)
• timer
  Timer Peripheral
• typelevel
  Module supporting type-level programming
• uart
  Universal Asynchronous Receiver Transmitter (UART)
• usb
  Universal Serial Bus (USB)
• vector_table
  Interrupt vector table utilities
• watchdog
  Watchdog
• xosc
  Crystal Oscillator (XOSC)

Macros

• bsp_pins
  Helper macro to give meaningful names to GPIO pins

Functions

• halt
  Halt the RP2040.
• reset
  Trigger full reset of the RP2040.

Attribute Macros

• entry
  Attribute to declare the entry point of the program